Unifi Ap Nanohd

  

  1. Unifi Nanohd Ap Retrofit Mount
  2. Unifi Ap Nanohd Datasheet
  3. Unifi Ap Nanohd Vs Pro

The UniFi nanoHD is a compact 4x4 MU-MIMO 802.11ac Wave 2 dual-band access point with an aggregate radio rate of over 2 Gbps and supports over 200 concurrent users. Engineered to take advantage of 802.11ac Wave 2, the UniFi nanoHDprovides powerful multi-user support in an elegant, nano-sized design. Download the latest firmware updates for your access point. To see current configuration go to: Settings Maintenance Support Info Show System Config. Perform an RF Scan to see what sort of interference is happening in the area (UniFi Controller, Devices section, clicking on the AP you wish to scan, and in the Properties Panel that slides. Manage multiple wireless networks from a single control panel with the Ubiquiti® UniFi® nanoHD Access Point (AP). The 802.11ac Wave 2 MU-MIMO technology enables the UniFi® AP to communicate with various clients simultaneously to increase multi-user (MU) throughput experience. Real-World Performance The UniFi nanoHD AP is the UniFi 802.11ac Wave 2 AP with the smallest form factor. Combining the performance increases from MU-MIMO technology and the use of 4x4 spatial streams, the UniFi nanoHD AP delivers up to 125% greater performance1 than a typical Wave 1 AP. Ubiquiti UniFi nanoHD - wireless access pointGeneral Information. Scalable Enterprise Wi-Fi Management UniFi is the revolutionary Wi-Fi system that combines enterprise performance, unlimited scalability, and a central management controller. The UniFi nanoHD AP has a refined industrial design and can be easily installed using the included mounting hardware.

Mounting Bracket
Screws (Qty. 4)
Keps Nuts (Qty. 4)
Gigabit PoE* (48V, 0.3A) with Mount Bracket

* Included only in the single-pack of the UAP-nanoHD.

  • CAT5 cable
  • Phillips screwdriver
  • Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
  • Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed)

Unifi Nanohd Ap Retrofit Mount

IMPORTANT: The UAP-nanoHD requires the UniFi Controller v5.7 or higher, available at: ui.com/download/unifi

System Requirements

  • Microsoft Windows 7/8/10, Mac OS X, or Linux
  • Java Runtime Environment 1.8 (or above)
  • Web Browser: Google Chrome (Other browsers may have limited functionality.)
  • UniFi Controller software v5.7 or higher (available at: ui.com/download/unifi)

LED

Ports

Locking Notch

The Locking Notch will be used with the Mounting Bracket to help secure the UniFi AP. (This is described further in the Mounting Bracket section.)

Reset

The Reset button serves two functions for the UniFi AP:

  • Restart Press and release the Reset button quickly.
  • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

Ethernet

This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.

Cable Feed Plug

If your Ethernet cable feeds along the mounting surface, remove the Cable Feed Plug.

Mounting Bracket

Locking Tab

During installation, the Locking Tab on the Mounting Bracket moves from the Initial Position to the Final Position, where the Locking Tab fits securely into the Locking Notch on the UniFi AP to help prevent theft.

Initial Position

Final Position

Note: If you need to remove the UniFi AP from the Mounting Bracket, insert a paper clip in the Slot to release the Locking Tab and turn the UniFi AP counterclockwise.

The device can be mounted on the wall or ceiling. Perform the steps for the appropriate installation.

Wall Mount

    Optional

Unifi Ap Nanohd

Ceiling Mount

The UAP-nanoHD features auto-sensing 802.3af PoE support and can be powered by any of the following:

  • Ubiquiti UniFi Switch with PoE
  • 802.3af PoE compliant switch
  • Ubiquiti Gigabit PoE Adapter (48V, 0.3A)

The single-pack of the UAP-nanoHD includes one Gigabit PoE adapter. For multi-pack units, PoE adapters or a UniFi Switch with PoE may be purchased separately.

Connecting to a PoE Switch

Connect the Ethernet cable from the UniFi AP directly to an 802.3af-compliant port on the switch.

Unifi Ap Nanohd Datasheet

UAP-nanoHD

Dimensions

160 x 160 x 32.65 mm

(6.3 x 6.3 x 1.29')

Weight

  • With Mounting Kits

300 g (10.6 oz)

  • 315 g (11.1 oz)

Networking Interface

(1) RJ45 GbE

Buttons

(1) Reset to Defaults

Power Method

802.3af

Power Supply

48V, 0.3A Gigabit PoE Adapter*

Max. Power Consumption

10.5W

Operating Frequency

2.4 GHz

5 GHz

Max. TX Power

  • 2.4 GHz
  • 5 GHz
  • 23 dBm
  • 26 dBm

Antenna Gain

  • 2.4 GHz
  • 5 GHz
  • 2.8 dBi
  • 3 dBi

MIMO

  • 2.4 GHz
  • 5 GHz
  • 2x2
  • 4x4

Radio Rate

  • 2.4 GHz
  • 5 GHz
  • 300 Mbps
  • 1733 Mbps

Wi-Fi Standards

802.11 a/b/g/n/ac/ac-wave2

Wireless Security

WEP, WPA-PSK,
WPA-Enterprise (WPA/WPA2, TKIP/AES)

BSSID

8 per Radio

Mounting

Wall/Ceiling (Kits Included)

Operating Temperature

-10 to 70° C (14 to 158° F)

Operating Humidity

5 to 95% Noncondensing

Certifications

CE, FCC, IC

Unifi Ap Nanohd Vs Pro

* Only the single-pack of the UAP-nanoHD includes a PoE adapter.

Unifi ap nanohd firmware

Operating Frequency (MHz)

US/CA

2400 - 2483.5

U-NII-1

5150 - 5250

U-NII-2A

5250 - 5350

U-NII-2C

5470 - 5725

U-NII-3

5725 - 5850

Worldwide

2400 - 2483.5
5150 - 5875